Today title is about D-Link wireless router Installation Considerations. Actually the D-Link wireless router installation considerations already informed in the D-Link DIR-615 user manual, so in this article we just want to remind again that you have to know the 6 (six) important point of Wireless Installation Considerations.
Please configure the router with the computer that was last connected directly to your modem. Also, you can only use the Ethernet
port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect
the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
Check it out below the 6 important point for D-link Wireless Router Installation Considerations
The D-Link DIR-615 wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
D-Link wireless router Installation Considerations
- Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum – each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
- Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a -degree angle it looks over 4 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
- Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
- Keep your product away (at least 3-6 feet or 1- meters) from electrical devices or appliances that generate RF noise.
- If you are using .4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your .4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
Finally, we hope our article about D-Link wireless router Installation Considerations, would help you regarding to avoid any problem for installing D-Link Router of DIR-615.